BMW X3 F25 X4 F26 series 6WB Cluster spedomether with HUD

Multifunctional instrument display 6WB compatible with X3 F25  and X4 F26 models

part number: 62108781319 

was found on the following vehicles:

    X3 F25 (2012-2017)
    X4 F26 (2014-2018)
    5' F07 GT   (09/2008 — 06/2013)
    5' F07 GT LCI   (08/2012 — 02/2017)
    5' F10   (01/2009 — 06/2013)
    5' F10 LCI   (08/2012 — 10/2016)
    5' F11   (01/2009 — 06/2013)
    5' F11 LCI   (08/2012 — 02/2017)
    6' F06 Gran Coupé   (05/2011 — 03/2015)
    6' F06 Gran Coupé LCI   (05/2014 — 09/2018)
    6' F12   (10/2009 — 02/2015)
    6' F12 LCI   (05/2014 — 05/2018)
    6' F13   (03/2010 — 02/2015)
    6' F13 LCI   (05/2014 — 10/2017)
    7' F01   (06/2007 — 06/2012)
    7' F01 LCI   (05/2011 — 05/2015)
    7' F02   (07/2007 — 06/2012)
    7' F02 LCI   (05/2011 — 05/2015)
    7' F03   (04/2008 — 05/2012)
    7' F03 LCI   (01/2012 — 03/2015)



Condition: Very good. Virginized - prepared for easy coding (no VIN).
This means that this digital cluster can be installed at any BMW service which can code your car.
You can do it yourself if you have ENET cable and ESYS software.

Installation and coding
Installation is easy:
1) lower the steering wheel so you have more space to work
2) remove 2 screws at the top of your cluster and remove your old digital cluster pulling it down from the top.
3) remove the cluster and disconnect all the cables
4) connect new digital cluster and put everything back where it was

Coding: Coding is needed after this retrofit!!
Support: you can always contact us, we are glad to help you on this journey.